Axle Clamp Assembly

Axle clamp assembly features Grade 8 square u-bolts and a precision-stamped, one-piece bottom plate for positive u-bolt alignment and reduced weight.

Available Configurations

Single Axle

Tandem Axle & Tandem Spread

Triple Axle

Widespread (51-121')

Mounting Options To Meet Your Needs

- designed for box-type frames
- hanger straddles flange and is welded on both sides

- designed for added weight savings in I-beam applications
- hangers are welded flush to the bottom of the frame

- developed to meet the cost-effective standards demanded by the chassis market

- available in welded version for permanent mounting
- bolted version with pre-fab holes also available

Torque Arms

Torque arm bushings are 20% thicker.

Fixed arm is one-piece cast design with no welds to break.


Ideal for low-mounting applications, these suspensions position the axle above the springs to accomodate height requirements. The underslung option delivers the same economical benefits available with the basic straddle mount and undermount configurations.

Hardened Steel Wear Pads

Hardened steel wear pads at critical spring contact points reduce hanger wear and prevent hanger failure.

Thicker Leaf Spring Contact Points

20% thicker leaf spring contact points for increased durability.

BLACK ARMOUR® Metal Treatment

The BLACK ARMOUR® metal protection process chemically bonds with metal to form a protective skin that is impervious to water and anti-icing chemicals. BLACK ARMOUR® is paint compatible without pre-sanding. If scratched, BLACK ARMOUR® inhibits the spread of creep corrosion.

This eco-friendly metal treatment provides remarkable protection without the added weight and cost of galvanization.

· Guards against environmental factors, e.g. moisture, stone chipping and salt
· No rust penetration
· Long-lasting and reliable retention of value